Wax Melt & Burner Safety


Wax Melt Burner (non-electrical)

Failure to follow these instructions could result in a fire hazard. Use only with good quality wax melts.

  • Never leave a burning candle unattended or move it when lit.
  • Remove all packaging before use.
  • Only use with a good quality tea-light. Do not use with a maxi tea-light, votive or other candles.
  • Keep the Wax Melt Burner and tea-light out of the reach of children and pets.
  • Do not burn the tea-light or leave the wax melt burner on or near anything that can catch fire.
  • Ensure the wax melt burner is well ventilated. 
  • Keep foreign objects out of the wax pool.
  • Keep the wick trimmed to 3-5mm and remove any carbon build up.
  • The wax melt burner becomes very hot during use, do not touch or move whilst alight or whilst wax remains molten.
  • Extinguish the tea-light if the flame becomes enlarged, makes contact with the wax melt burner, or begins to smoke.
  • Use a candle snuffer to extinguish the flame. Once extinguished allow wax melt burner to cool before moving.

Direction for Use

  • Place the wax melt burner on a level, flat, cool, heat-resistant surface away from draughts, other heat sources and flammable objects. If used on a non-heat resistant surface damage may occur if the wax melt burner is used without a protective plate, tray or similar product.
  • Position the wax melt segment on the top bowl of the wax melt burner.
  • Insert a tea-light in the bottom base of the wax melt burner.
  • Allow the heat of the tea-light to melt the wax and fragrance will release into the room. The wax melt burner will become hot while in use, do not touch while in use, heated wax can cause burns. Allow the burner to cool completely before touching or moving.
  • Do not allow the pool of wax to completely evaporate so the top bowl becomes dry whilst a tea-light is still lit. This could cause the wax melt burner to scorch and (or) smoke.
  • Let the wax melt burner completely cool before re-use.
  • DO NOT USE METAL OBJECTS TO CLEAN OUT THE WAX. DO NOT APPLY EXCESSIVE PRESSURE WHEN CLEANING OR REMOVING WAX. THIS MAY CRACK AND DAMAGE THE BURNER. DO NOT PLACE THE BURNER IN A FREEZER.
  • WAX MELT BURNERS BECOME HOT DURING USE. ONLY USE ON A HEAT RESISTANT SURFACE. IF UNSURE USE A PROTECTIVE PLATE, TRAY OR SIMILAR PRODUCT.

Electric Wax Melt Burner

Failure to follow these instructions could result in a fire hazard. Use only with good quality wax melts.

  • Never leave an electric wax melt burner unattended whilst in use.
  • Remove all packaging before use.
  • Keep the electric wax melt burner out of the reach of children and pets.
  • Do not leave the electric wax melt burner on or near anything that can catch fire.
  • Ensure the electric wax melt burner is well ventilated. Keep foreign objects out of the wax pool.
  • The electric wax melt burner becomes very hot during use, do not touch or move whilst turned on or whilst wax remains molten.

Direction for Use

  • Place the electric wax melt burner on a level, flat, cool, heat-resistant surface away from other heat sources and flammable objects. If used on a non-heat resistant surface damage may occur if the electric wax melt burner is used without a protective plate, tray or similar product.
  • Position the wax melt segment on the top bowl of the wax melt burner.
  • Plug in the electric wax melt burner and switch it on.
  • Allow the heat of the bulb to melt the wax and fragrance will release into the room. The electric wax melt burner will become hot while in use, do not touch while in use, heated wax can cause burns. Allow the burner to cool completely before touching or moving.
  • Do not allow the pool of wax to completely evaporate so the top bowl becomes dry whilst the electric wax melt burner is switched on. This could cause the electric wax melt burner to scorch.
  • Switch off the electric wax melt burner and unplug from the mains when not in use.
  • Let the electric wax melt burner completely cool before re-use.
  • DO NOT USE METAL OBJECTS TO CLEAN OUT THE WAX. DO NOT APPLY EXCESSIVE PRESSURE WHEN CLEANING OR REMOVING WAX. THIS MAY CRACK AND DAMAGE THE BURNER. DO NOT PLACE THE BURNER IN A FREEZER.
  • ELECTRIC WAX MELT BURNERS BECOME HOT DURING USE. ONLY USE ON A HEAT RESISTANT SURFACE. IF UNSURE USE A PROTECTIVE PLATE, TRAY OR SIMILAR PRODUCT.